Mitsubishi Electric MELSEC iQ-F Series User Manual page 167

■Tool setting storage area clear status (Un\G108875)
This area stores the tool setting deletion status.
Bit
b0
b1
■Tool setting change function enable flag (Un\G108876)
This area stores the source information of the tool settings that are currently reflected.
• 0: Setting values from GX Works3
• 1: Setting values registered to a flash ROM by using the buffer memory
■Tool setting storage area write error code (Un\G108877)
This area stores the error code of when writing of the tool setting fails.
When completed successfully, this area is cleared to 0 when the power supply is turned from off to on or the CPU module is
reset.
• 0: No error
• Other than 0: Refer to the list of error codes.
Page 110 List of Error Codes
■Tool setting storage area clear error code (Un\G108878)
This area stores the error code of when deletion of the tool setting fails.
When completed successfully, this area is cleared to 0 when the power supply is turned from off to on or the CPU module is
reset.
• 0: No error
• Other than 0: Refer to the list of error codes.
Page 110 List of Error Codes
Tool setting
■Certificate Configuration Tool connection control setting (Un\G108879)
• 0: Connection disable
• 1: Password Authentication
• 2: Connection enable
■Certificate Configuration Tool password (Un\G108880 to Un\G108895)
Set the password with 6 to 31 characters in ASCII format.
The set value is enabled only when password authentication is selected for the connection control setting.
This area is not written when 2 (Execute (no password change)) is selected for the write execution.
Certificate diagnostic information
■Certificate expiration within 90 days flag (Un\G108897)
This flag turns on when a client certificate will expire within 90 days.
• 0: 91 days or more until expiration
• 1: 90 days or less until expiration
■Expired certificate flag (Un\G108898)
This flag turns on when a client certificate has expired.
• 0: Not yet expired
• 1: Expired
0
1
0
1
Status
Not completed
Completed
Normal
Error
Appendix 4 Buffer Memory
A
APPX
165