Mitsubishi Electric MELSEC iQ-F Series User Manual page 156

Hide thumbs Also See for MELSEC iQ-F Series:
Table of Contents

Advertisement

Reserved station specification status of each station
■Reserved station specification status of each station (Un\G4113 to Un\G4114)
Stores the setting state of the reserved station set with GX Works3. ( Page 71 )
Address
Bit
Un\G4113
b0
b1
b2
b15
Un\G4114
b0 to b15
• Only the bit of the start station number turns on.
• The status is not stored for the reserved stations and the station numbers after the maximum station
number.
Link scan information (group number 1)
■Link scan information (group number 1) (Un\G4117 to Un\G4119)
Link scan information of group number 1 is stored.
Address
Name
Un\G4117
Maximum link scan time (Unit: ms)
Un\G4118
Minimum link scan time (Unit: ms)
Un\G4119
Current link scan time (Unit: ms)
Link scan information (group number 2)
■Link scan information (group number 2) (Un\G4121 to Un\G4123)
Link scan information of group number 2 is stored.
Address
Name
Un\G4121
Maximum link scan time (Unit: ms)
Un\G4122
Minimum link scan time (Unit: ms)
Un\G4123
Current link scan time (Unit: ms)
Diagnostic request information
■Diagnostic request information (Un\G4127)
Specify a remote station number whose diagnostic information (Un\G4129 to Un\G4159) is to be displayed.
• 0: Not specify
• 1 to 32: Displays the diagnostic information for the specified station number.
APPX
154
Appendix 4 Buffer Memory
Station number
Station 1
Station 2
Station 3
Station 16
Station 17 to 32
Description
• On: Reserved station
• Off: Other than reserved station
Description
The maximum link scan time value during cyclic transmission is stored. (Unit: ms)
The minimum link scan time value during cyclic transmission is stored. (Unit: ms)
The current link scan time value during cyclic transmission is stored. (Unit: ms)
Description
The maximum link scan time value during cyclic transmission is stored. (Unit: ms)
The minimum link scan time value during cyclic transmission is stored. (Unit: ms)
The current link scan time value during cyclic transmission is stored. (Unit: ms)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec iq-f fx5-enetFx5-u-enet-e09r736

Table of Contents