Installation; Environment Requirements - Huawei LUNA2000-100KTL-M1 User Manual

LUNA2000-100KTL-M1 Smart Power Control System
User Manual

4.1 Environment Requirements

Basic Requirements
●
●
●
●
●
●
●
●
●
●
●
Issue 02 (2023-01-10)
Do not install the Smart PCS in working or living areas.
If the device is installed in public places (such as parking lots, stations, and
factories) other than working and living areas, install a protective net outside
the device and erect a warning sign to isolate it. This is to avoid personal
injury or property loss caused by accidental contact or other reasons during
device operation.
Do not install the Smart PCS near flammable materials.
Do not install the Smart PCS near explosive materials.
Do not install the Smart PCS near corrosive substances.
The corrosion resistance level of the equipment is C5 Medium. Therefore, the
site must be a class C or higher environment but not a class D or E
environment.
Do not install the Smart PCS where its enclosure and heat sink are easily
accessible, as the voltage is high and certain parts become hot during
operation.
The Smart PCS must be installed in a well-ventilated environment to ensure
good heat dissipation.
If the Smart PCS is installed in a closed environment, a heat dissipation or
ventilation device must be installed. The indoor ambient temperature cannot
be higher than the external ambient temperature.
The Smart PCS will become corroded if installed in areas exposed to salt.
Before installing the Smart PCS outdoors in such areas, consult with the
Company. An area exposed to salt refers to regions within 500 m of the coast,
or those exposed to a sea breeze (this can vary due to such weather
conditions as typhoons and monsoons, or terrain such as dams and hills).
The Smart PCS should be installed more than 30 m away from the third-party
wireless communication facilities and residential environments.
Copyright © Huawei Technologies Co., Ltd.
4

Installation

4 Installation
23