LUNA2000-100KTL-M1 Smart Power Control System
User Manual
Working
Mode
Operating
Shutdown
2.5 Typical Application Scenario
Figure 2-8 Electrical connection diagram (components in the dotted box are
optional)
Issue 02 (2023-01-10)
Description
In operating mode:
● The Smart PCS controls charge and discharge based on system
commands.
● The Smart PCS enters Shutdown mode after detecting a fault or
receiving a shutdown command.
● In Standby or Operating mode, the Smart PCS enters Shutdown
mode after detecting a fault or receiving a shutdown command.
● In Shutdown mode, the Smart PCS enters Standby mode when
a startup command is received and faults are rectified, the DC
power is insufficient, or the DC external switch is turned off.
Copyright © Huawei Technologies Co., Ltd.
2 Product Overview
19