Connecting Ac Power Cables - Huawei LUNA2000-100KTL-M1 User Manual

LUNA2000-100KTL-M1 Smart Power Control System
User Manual
Procedure
● The cable outer diameter can be measured using the ruler sticker in the
● Ensure that the cable jacket is in the maintenance compartment.
● Ensure that the DC power cables are connected securely. Otherwise, the Smart
● Do not pull the cables horizontally after they have been secured, as this may
Step 1 The prefabricated DC power cables (with corrugated pipes) are delivered with the
ESS. Remove the rubber rings based on the cable diameter range.
Step 2 Connect the DC power cables to the terminal block and ensure that the cables are
securely connected.
Figure 5-9 Connecting DC power cables
----End

5.7 Connecting AC Power Cables

Precautions
A three-phase AC switch should be installed on the AC side of the Smart PCS. To
ensure that the Smart PCS can safely disconnect itself from the power grid if an
Issue 02 (2023-01-10)
NO TICE
maintenance compartment.
PCS may fail to operate, or become overheated during operation due to an
unreliable connection, which will damage the terminal block.
damage the wiring terminals.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
40