Huawei LUNA2000-100KTL-M1 User Manual page 67

LUNA2000-100KTL-M1 Smart Power Control System
User Manual
No. Category
10 Shutdown
gradient
11 Hibernate at
night
12 Upgrade delay
13 HVRT/LVRT
14
Issue 02 (2023-01-10)
Parameter Description
Shutdown Specifies the power change
gradient (%/s) rate when the device shuts
down.
Hibernate at The device performs the
night monitoring function at night.
If this parameter is set to
Enable, the monitoring
function of the device will
hibernate at night to reduce
power consumption.
Upgrade delay This parameter is mainly used
in upgrade scenarios where
the power supply at DC side
is disconnected.
HVRT HVRT is short for high
voltage ride-through. When
the grid voltage is abnormally
high for a short time, the
device cannot disconnect
from the power grid
immediately and must
continue to operate for some
time.
HVRT triggering Specifies the threshold for
threshold (V) triggering HVRT. The
threshold settings should
meet the local grid standard.
Copyright © Huawei Technologies Co., Ltd.
6 Power-On Commissioning
Remarks
-
-
After the upgrade
starts, if Upgrade
delay is set to
Enable, the upgrade
package is loaded
first. After the DC
side power supply
recovers and the
activation conditions
are met, the device
automatically
activates the
upgrade.
-
This parameter is
displayed when
HVRT is set to
Enable.
61