Setting Power Adjustment Parameters - Huawei LUNA2000-100KTL-M1 User Manual

LUNA2000-100KTL-M1 Smart Power Control System
User Manual

6.5.4 Setting Power Adjustment Parameters

Procedure
Step 1 On the home screen, tap Power adjustment to go to the parameter setting
screen.
----End
Parameters
No. Category
1 Remote control
2 Active power
3
4
5
6 Reactive power
7
8
9 Q-U
characteristic
curve
Issue 02 (2023-01-10)
Parameter
Remote power
schedule
Plant active power
gradient (min/%)
Active power
change gradient
(%/s)
Active power (kW)
Active power (%)
Reactive power
change gradient
(%/s)
Power factor
Reactive power
compensation
(Q/S)
Q-U characteristic
curve
Copyright © Huawei Technologies Co., Ltd.
Description
If this parameter is set to
Enable, the inverter responds to
the scheduling instruction from
the remote port. If this
parameter is set to Disable, the
inverter does not respond to the
scheduling instruction from the
remote port.
Specifies the rate of active power
rise due to sunlight changes.
Specifies the change rate of the
device's active power.
Specifies the fixed active power
of the device.
Specifies the active power of the
device in percent.
Specifies the change rate of the
device's reactive power.
Specifies the power factor of the
device.
Specifies the reactive power of
the device.
The device adjusts Q/S (the ratio
of the output reactive power to
apparent power) in real time
based on U/Un(%) (the ratio of
the actual power grid voltage to
the rated power grid voltage).
6 Power-On Commissioning
Remarks
-
-
-
-
-
-
-
-
-
69