NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual (1350 mm Depth)
No.
6
Follow-up Procedure
After you have completed the teamwork settings, perform the following checks to
confirm whether the teamwork networking is successful:
Step 1 Check whether the number of devices in the topology is the same as the actual
number of devices.
●
●
Step 2 Check whether the number of the running devices in the topology is the same as
the actual number of devices.
●
●
Step 3 Check whether the number of standby devices in the topology is the same as the
actual number of devices.
●
●
Step 4 Check whether the number of online devices in the topology is the same as the
actual number of devices.
●
●
----End
6.5.3 (Optional) Setting Communications Parameters
6.5.3.1 Setting Access Control Parameters
Path: Settings > Comm Settings > Access Control
Figure 6-12 Access Control
Issue 04 (2022-12-15)
Item
Background color:
red/bright gray
If yes, go to the next step.
If no, check the cable connection and the teamwork settings.
If yes, go to the next step.
If no, check the cable connection and the teamwork settings.
If yes, go to the next step.
If no, check the cable connection and the teamwork settings.
If yes, the check is complete. The teamwork settings are correct.
If no, check the cable connection and the teamwork settings.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Note
● Red indicates that the unit has generated a
critical alarm, as shown in
● Bright gray indicates that the device is
operating without any critical alarms.
6 Power-On Commissioning
.
126