Open An Existing Marking File From Your Pc; Save A Marking File To The Laser Marking System - Panasonic LP-GS Series Operation Manual

6.3.3

Open an existing marking file from your PC

You can open an existing marking file from your PC, make changes and save your changed
file on the laser marking system.
1. Establish an online connection between your PC and the laser marking system.
2. Go to the "Marking settings" screen and select "Open" > "From PC".
3. Choose a marking file (.lms) from your local or network drive and select "Open".
A dialog opens and shows a list of all marking files saved on the laser marking system.
4. Select an empty table row to assign the marking file to a number on the laser marking
system.
It is possible to overwrite an existing marking file with a new file. To do this, select the
marking file in the list that you want to overwrite.
5. Select "OK".
The file opens in the marking image editor.
6. You can edit marking objects and specify the marking settings.
7. When you finish the editing process, save the changed marking file.
Related topics
About marking files
Online connection between PC and laser marking system
Edit marking data

Save a marking file to the laser marking system

Manage files in the laser marking system
6.3.4 Save a marking file to the laser marking system
You must save a marking file to the laser marking system before you can perform the
marking process.
Up to 10000 marking files can be stored in one laser marking system.
If you edit your marking data in online mode, the corresponding marking file is already
present on the connected laser marking system and is listed in "Data management" >
"Marking files".
A restricted user can perform this operation, if the option "Save to laser marking system" is
enabled in "System settings" > "Access permissions".
ME-NAVIS2-OP-1
(page 60)
(page 83)
(page 71)
(page 39)
(page 65)
6 Work with files
65