Panasonic LP-GS Series Operation Manual page 341

E653 Cause:
The graphic file cannot be read.
Remedy:
• Add the graphic file again in the "Data management" screen.
• Check the graphic file format.
E654 Cause:
No font file is available at the specified font number.
Remedy:
• Add the font file in the "Data management" screen.
• Specify the correct font number in the character settings.
E655
Cause:
The font file exceeds the memory capacity for font files of the laser
marking system.
Remedy:
• Reduce the number of characters in the font file.
• Delete unnecessary font files.
E656 Cause:
The specified graphic file is not available.
Remedy:
Add the graphic file in the "Data management" screen.
E657 Cause:
The selected font is not available for the specified characters.
Remedy:
• Change the characters, or add the required font file.
• To use Japanese or Simplified Chinese characters, set East Asian
characters in the file settings.
E658
Cause:
The marking object contains too many characters.
Remedy:
• Reduce the number of characters.
• Distribute the characters over several objects.
ME-NAVIS2-OP-1
27 Troubleshooting
341