Panasonic LP-GS Series Operation Manual page 209

‒ "Number of characters":
Character strings representing the functional characters for the register function (registered
characters switching via I/O connector)
Registration table number: %INP:n
Item
n
Character strings representing the functional characters for character entry per trigger (SIN
command)
Maximum number of characters per string and character number: %MM:Sn
Item
MM
n
Related topics
Configure parameters for the register function (registered characters)
Use functional characters
ME-NAVIS2-OP-1
Select the character string number that is specified in the communication command
data.
Setting range: "0" to "15"
Specify the maximum number of characters per string. This number is used only for
the display in the marking image editor.
Setting range: "0" to "99"
Input character string
"0"–"3"
Input character string
"00"–"99"
"0"–"9"
"A"–"F"
(page 201)
19 Functional character settings
Description
Registration table numbers "0" to "3"
Description
Maximum number of characters per string
Character numbers "0" to "9"
Character numbers "10" to "15"
(page 218)
209