Panasonic LP-GS Series Operation Manual page 322

27 Troubleshooting
E159 Cause:
A network error occurred.
Remedy:
Make sure the optional network unit is installed correctly.
Applies to LP-RF, LP-RV only.
E160–E194 Cause:
A system error occurred.
Remedy:
Check the connection of cables and signal lines, and restart the laser
marking system.
E200–E201 Cause:
The safety relay used for the INTERLOCK inputs on the laser marking
system is defective.
Remedy:
Contact our sales offices or representatives.
Applies to LP-GS only.
E202 Cause:
A system error occurred.
Remedy:
Check the connection of cables and signal lines, and restart the laser
marking system.
E205–E207 Cause:
• An error occurred in the shutter.
• The signal cable or unit power cable is not connected correctly.
Remedy:
Check the connection of cables and signal lines, and restart the laser
marking system.
E208–E214
Cause:
A system error occurred.
Remedy:
Check the connection of cables and signal lines, and restart the laser
marking system.
322 ME-NAVIS2-OP-1