Yamaha AW2816 Owner's Manual page 342

AUTOMIX screen
• PAN button
If this button is on, pan/balance operations of each
channel will be recorded.
• EQ button
If this button is on, EQ operations of each channel
will be recorded.
Tip!
• In addition to the above parameters, automix can
also record library recall operations and scene recall
operations. These recall operations will be recorded
in automix regardless of the OVERWRITE ( 7 ) set-
tings.
• If you want the [ON] key and fader operations in the
REMOTE screen to be recorded in automix, turn on
the FADER button and CH ON button in the OVER-
WRITE area.
H
NEW MIX button
When you move the cursor to this button and
press the [ENTER] key, the current automix will be
erased and a new automix will be created.
I
CLR. BUF (Clear buffer) button
When you move the cursor to this button and
press the [ENTER] key, the undo buffer will be
cleared.
When the undo buffer is cleared, it will no longer be
possible to use the UNDO button ( J ) to return to the
previous state.
Tip!
If you are unable to record into the current automix
because of insufficient automix memory, you may be
able to increase the amount of free space by clearing
the undo buffer.
J
UNDO button
When you move the cursor to this button and
press the [ENTER] key, the automix will return to
the previous state (the state prior to the most
recent recording) ("Undo"). At this time, the last-
recorded automix data will be saved in the undo
buffer. If you execute Undo once again, the last-
recorded automix data will return ("Redo").
Automix undo/redo cannot be executed using the
[UNDO]/[REDO] panel key.
340
Additional functions in the Main
page
In the Main page you can press the [SHIFT] key to
assign the following functions to the [F1]–[F5] keys.
• [F1] (ABORT) key
Stops automix recording and discards the changes.
This is the same function as the ABORT button in
the AUTOMIX TRANSPORT area (4).
• [F2] (STOP) key
Stops automix recording/playback. This is the
same function as the STOP button in the AUTO-
MIX TRANSPORT area (4).
• [F3] (PLAY) key
Begins automix recording. This is the same func-
tion as the PLAY button in the AUTOMIX TRANS-
PORT area (4).
• [F4] (REC) key
Enters automix record-ready mode. This is the
same function as the REC button in the AUTOMIX
TRANSPORT area (4).
• [F5] (AUTOREC) key
Performs automatic automix recording. This is the
same function as the AUTO REC button in AUTO-
MIX TRANSPORT area (4).
Reference section