Yamaha AW2816 Owner's Manual page 260

Professional audio workstation
Hide thumbs Also See for AW2816:
Table of Contents

Advertisement

SETUP screen
Monitor the digital input signals
Function
Monitor the state of the digital audio
signals being input from the DIGITAL
STEREO IN jack or from digital I/O
card installed in the OPTION I/O slot.
Key operation
• [SETUP] key
[F2] (Monitor) key
• Repeatedly press the [SETUP] key
until the screen shown at the right
appears.
Screen functions
A
CHANNEL STATUS MONITOR
Here you can monitor the status of the digital sig-
nals that are input from the DIGITAL STEREO IN
connector and from a digital I/O card installed in
OPTION I/O. Each display item has the following
significance.
• Fs (frequency)
Indicates the sampling frequency of the input sig-
nal.
Display
44.1k
Sampling frequency = 44.1 kHz
48k
Sampling frequency = 48 kHz
None
Unknown sampling frequency
No signal is being input, or an
UNLOCK
invalid signal is being input
• EMPHASIS
This shows whether the input signal has been pro-
cessed by emphasis.
Display
ON
Emphasis on
OFF
Emphasis off
???
Unknown
• CATEGORY
This shows the category of the digital input signal.
Display
GEN
General use
Optical laser device such as a
LASER OPTICAL
CD player
258
Monitor page
Meaning
Meaning
Meaning
Reference section
1
D/D Conv
D/D converter or signal processor
D.Broadcast
Digital broadcast
Instrument
Instrument or sound module
A/D converter
AD Conv
(without copyright data)
A/D converter
A/D Conv with (c)
(with copyright data)
Solid Memory
Solid-state memory device
Experimental
Experimental device
Unknown
Unknown device
• COPY (copy permit)
This shows the copy permit/prohibit status of the
digital input signal.
Display
OK
Copying permitted
Prohibit
Copying prohibited
Tip!
• Processing that pre-emphasizes the high-frequency
portion of the signal is called "emphasis," and pro-
cessing that attenuates this portion to restore the
original flat response is called "de-emphasis." Even if
the AW2816 receives a signal to which emphasis has
been applied, it will not perform de-emphasis.
• Digital input signals from option I/O are displayed in
pairs of adjacent odd-numbered
input channels (channels 1/2, 3/4, ...)
Meaning
even-numbered

Advertisement

Table of Contents
loading

Table of Contents