Yamaha AW2816 Owner's Manual page 129

INSERT
Insert silence into the specified part. Subsequent
audio data will be moved backward according to the
length of the silent data that was inserted.
• TRACK
Select the track into which silence will be
inserted. If you select "AL" (*) for this setting,
silence will be inserted into all virtual tracks cur-
rently selected for tracks 1–16.
• START
Specify the starting location of the part into
which silence will be inserted.
• END
Specify the ending location of the part into which
silence will be inserted.
• ALL V.TR (All virtual tracks) (*)
Select whether silence will be inserted into all
virtual tracks included in the track (Yes), or only
into the virtual track currently selected for the
track (No).
• EXECUTE
Execute the command.
START END
1 2 3 4 5
INSERT
1 2 3 2 3 4 5
T-COMP (Time compression/expansion
Expand or compress the length of the specified part
without affecting its pitch.
• TRACK
Select the track in which you want to expand or
compress the length.
• START
Specify the starting location of the part to be
expanded/compressed.
• END
Specify the ending location of the part to be
expanded/compressed.
• RATIO
Specify the ratio of expansion/compression in
0.01% units, over a range of 50–200%.
• EXECUTE
Execute the command.
A B C
A B C
Operation section
START END
1 2 3 4 5
1 2 3 4 5
START END
1 2 3 4 5
1 2 3 4 5
• Execution of the T-COMP command will require
more processing time than the actual time length of
the data being processed. Also, it is not possible to
cancel the command while processing is occurring.
• If multiple regions existed in the specified part, they
will be combined into a single region as a result of
executing this command. If there are gaps between
regions, they will be converted into silent audio
data.
PITCH
Raise or lower the pitch of the specified part without
affecting the length of the audio.
• TRACK
Select the track that contains the part whose
pitch you want to change.
• START
Specify the starting location of the part whose
pitch will be changed.
• END
Specify the ending location of the part whose
pitch will be changed.
• PITCH
Specify the amount of pitch change in semitone
steps, over a range of ±12 semitones.
• FINE
Specify a fine adjustment in one-cent units to the
pitch change, over a range of ±50 cents.
• EXECUTE
Execute the command.
• Execution of the PITCH command will require more
processing time than the actual time length of the
data being processed. Also, it is not possible to can-
cel the command while processing is occurring.
• If multiple regions existed in the specified part, they
will be combined into a single region as a result of
executing this command. If there are gaps between
regions, they will be converted into silent audio
data.
A B C
T-COMP
RATIO=50%
A B C
A B C
T-COMP
RATIO=150%
B C
123
7