Yamaha AW2816 Owner's Manual page 320

HOME screen
Monitor the input level of each channel
Function
This page displays the input level of
input channels 1–8, return channels 1/
2, and monitor channels 1–16.
Key operation
• [HOME] key [F1] (IN/Rtn/MONI)
key
• Repeatedly press the [HOME] key
until the screen shown at the right
appears.
Screen functions
A
Level meters
This area indicates the input level of each channel.
Below each level meter, the location of the fader
for that channel is displayed in dB units.
B
PRE EQ button
C
POST EQ button
D
POST FADER button
Use these three buttons to select the location
within the signal routing that will be displayed by
the level meters (1). Turning on the PRE EQ but-
ton will display the pre-EQ signal level, the POST
EQ button will display the post-EQ signal level,
and the POST FADER button will display the post-
fader signal level. This is convenient when you
want to see the location at which the input signal
of that channel is clipping.
PRE EQ POST EQ
METER METER
ATT
4BAND EQ
DYNAMICS
etc.
Tip!
The settings of buttons ( 2 )–( 4 ) also affect the input
meter display in the VIEW screen CH VIEW/Library
page.
318
IN/Rtn/MONI page
1
POST FADER
METER
ON LEVEL
PAN
Reference section
2 3 4
E
STEREO OUT LEVEL
This displays the position of the STEREO fader in
dB units.
Additional functions in the IN/Rtn/
MONI page
In the IN/Rtn/MONI page, holding down the [SHIFT]
key will assign the following additional function to
the [F1] key.
• [F1] (PEAK HOLD) key
Switches the Peak Hold function on/off. When
peak hold is on, a " " symbol indicating the
peak level will be maintained in the level meter
(1). The peak hold setting also affects the level
meters displayed in pages other than in the EQ/
ATT/GRP screen and the DYN/DLY screen.
5