Yamaha AW2816 Owner's Manual page 128

Editing tracks and virtual tracks
7
• INTERVAL
If the TIMES parameter is set to 2 or more, specify
the spacing between the start locations of each
copy. This cannot be set to a time that is shorter
than the length of the specified part.
• INSERT
Specify whether the copied audio data will be
inserted into the copy destination track (Insert) or
overwritten (Overwrite).
• EXECUTE
Execute the command.
FR.START
Copy source track
1
(FR.TRACK)
Copy destination track
A
(TO TRACK)
TO START
Copy destination track
A
after execution
Copy destination track
A
after execution
Copy destination track
A
after execution
Tip!
If you copy from a paired track to an unpaired track,
the copy destination track will automatically be
paired. If you copy from an unpaired track to a paired
track, the same audio data will be copied to both of
the paired tracks.
122
FR.END
2 3 4 5 6
COPY
B C D E F
COPY
INSERT=
B 2 3 4 C D E F
Insert
INSERT=
B 2 3 4 F
OverWrite
B 2 3 4 2 3 4 TIME= 2
INTERVAL
MOVE
Move the audio data of the specified part to the speci-
fied location of the specified track. At this time, the
audio data at the move destination will be erased.
• FR.TRACK (From track)
Select the move source track.
• FR.START (From start)
Specify the start location of the part that will be
moved.
• FR.END (From end)
Specify the end location of the part that will be
moved.
• ALL V.TR (All virtual tracks) (*)
Specify whether all virtual tracks included in the
track will be moved (Yes), or whether only the
virtual track currently selected for the track will
be moved (No).
• TO TRACK
Select the move destination track.
• TO START
Select the start location of the move destination.
• INSERT
Specify whether the audio data will be inserted
into the move destination track (Insert) or over-
written (OverWrite).
• EXECUTE
Execute the command.
Move source track
(FR.TRACK)
Move destination track
(TO TRACK)
Move destination track
after execution
Move destination track
after execution
Tip!
If you move from a paired track to an unpaired track,
the move destination track will automatically be
paired. If you move from an unpaired track to a
paired track, only the odd-numbered track will be the
move destination.
Operation section
FR.START FR.END
1 2 3 4 5 6
MOVE
A B C D E F
TO START
MOVE
A B 2 3 4 C D E
A B 2 3 4 F
INSERT=
F
Insert
INSERT=
OverWrite