Naming A Track Or Region; Editing A Virtual Track Name - Yamaha AW2816 Owner's Manual

Naming a track or region

When something is recorded on a track, a default
name is assigned to that virtual track and region as fol-
lows.
• Default virtual track name
............... V.Tr x-y (x= track number, y=
virtual track number)
• Default region name
............... VTxy (x= track number, y=
virtual track number)
Tip!
If multiple regions exist in the same track (i.e., if you
recorded more than one time), each region will have
the same name.
These track names and virtual track names can be
edited as follows.

Editing a virtual track name

1
Press the [EDIT] key
The EDIT screen TR Edit page will appear.
1 2
3
4
This page displays the following information.
1 Track numbers
These are the track numbers 1–16.
B Track names
These are the names assigned to each virtual
track.
C TRACK/PART/REGION menu
These buttons let you select commands for edit-
ing tracks, parts, or regions. Use the TRACK
menu to edit a track name, or use the REGION
menu to edit a region name.
D Parameter settings
This area displays the parameters needed to exe-
cute the editing command.
[F1] (TR Edit) key.
Operation section
2
Move the cursor to the TRACK menu, and
press the [ENTER] key.
The editing commands in the TRACK menu will
be listed.
3
Move the cursor to the NAME command
and press the [ENTER] key.
A button for setting the parameters of the NAME
command will appear.
4
Move the cursor to the TRACK parameter
button, and press the [ENTER] key.
The cursor will move to the parameter setting
area in the lower right of the display.
5
Use the [DATA/JOG] dial to select the track,
and press the [ENTER] key.
6
Move the cursor to the NAME parameter,
and press the [ENTER] key.
The NAME EDIT popup window will appear,
allowing you to input the track name.
7
109