Mitsubishi Electric MELSECQ Series User Manual page 34

2 SYSTEM CONFIGURATION
Programmable
controller CPU
C Controller module
Applicable network module
QJ72LP25-25
QJ72LP25G
QJ72LP25GE
QJ72BR15
2 - 4
Downloaded from ManualsNet.com
Applicable CPU module
CPU type CPU model
Safety CPU QS001CPU
Q06CCPU-V
Q06CCPU-V-B
1: Limited within the range of I/O points for the CPU module.
2: Can be installed to any I/O slot of a base unit.
3: Use the QD70 whose serial No. (first five digits) is 09012 or later.
(b) Mounting to a MELSECNET/H remote I/O station
The table below shows the network modules and base units applicable to
the QD70 and quantities for each network module model.
Depending on the combination with other modules or the number of
mounted modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if
the power supply capacity is insufficient, change the combination of the
modules.
No. of modules
Up to 64
1: Limited within the range of I/O points for the network module.
2: Can be installed to any I/O slot of a base unit.
REMARK
The Basic model QCPU or C Controller module cannot create the MELSECNET/H
remote I/O network.
search engine
1
No. of modules
N/A
Up to 64
1
Main base unit of remote I/O
station
MELSEC-Q
2
Base unit
Extension base
Main base unit
unit
: Applicable
2
Base unit
Extension base unit of
remote I/O station
: Applicable
2 - 4
: N/A
: N/A