Mitsubishi Electric MELSECQ Series User Manual page 108

6 UTILITY PACKAGE (GX Configurator-PT)
6 - 3
Downloaded from ManualsNet.com
(6) Number of parameters that can be set in GX Configurator-PT
When multiple intelligent function modules are mounted, the number of
parameter settings must not exceed the following limit.
When intelligent function modules are
installed to:
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HCPU
Q02PH/Q06PH/Q12PH/Q25PHCPU
Q12PRH/Q25PRHCPU
Q02UCPU
Q03UD/Q04UDH/Q06UDH/Q13UDH/
Q26UDH/Q03UDE/Q04UDEH/
Q06UDEH/Q13UDEH/Q26UDEHCPU
MELSECNET/H remote I/O station
For example, if multiple intelligent function modules are installed to the
MELSECNET/H remote I/O station, configure the settings in GX Configurator so
that the number of parameter settings for all the intelligent function modules does
not exceed the limit of the MELSECNET/H remote I/O station.
Calculate the total number of parameter settings separately for the initial setting
and for the auto refresh setting.
The number of parameters that can be set for one module in GX Configurator-PT
is as shown below.
Target module
QD70P4
QD70P8
Example) Counting the number of parameter settings in Auto refresh setting
search engine
Maximum number of parameter settings
Initial setting
512
512
512
512
2048
4096
512
Initial setting
12 (Fixed)
24 (Fixed)
This one row is counted as one setting.
Blank rows are not counted.
Count up all the setting items on this screen, and
add the total to the number of settings for other
intelligent function modules to get a grand total.
MELSEC-Q
Auto refresh setting
256
256
256
256
1024
2048
256
Auto refresh setting
26 (Max.)
50 (Max.)
6 - 3