Mitsubishi Electric MELSECQ Series User Manual page 102

5 SETUP AND PROCEDURES BEFORE OPERATION
5 - 17
Downloaded from ManualsNet.com
Operating procedure
Using GX Developer, make settings starting with the QCPU PLC parameter "I/O
assignment setting" screen.
POINT
The values set in the "I/O assignment setting" PLC parameter of the QCPU can be
confirmed using the module's detailed information that can be displayed on the
system monitor of GX Developer. Refer to Section 12.3 for details.
search engine
(a) I/O assignment setting screen
Specify the following for the slot where the QD70
is mounted.
Type : Select "Intelli."
Model name : Enter the module's model name.
Points : Select 32 points.
Start XY : Enter the start I/O signal for the
QD70.
(b) Switch setting for I/O and intelligent function
module
Click on Switch setting on the I/O assignment
setting screen to display the screen at left and set
switches 1 to 4. The setting can easily be done if
values are entered in hexadecimal. Change the
input format to hexadecimal and enter values.
MELSEC-Q
5 - 17