Toro Groundsmaste 3200 Series Installation Instructions Manual page 9

2. Secure the light cross mount to the platform
using the previously removed bolts, nuts, and
tie-down bracket (Figure
Figure 18
1. Bolt
2. Tie-down bracket
3. Secure the left light mount and right light mount
to the light cross mount using 3 button-head
bolts (1/4 x 5/8 inch) through the speed nuts on
each side (Figure
Note:
Refer to the
for the appropriate position of the lights.
Figure 19
1. Right light mount
2. Button-head bolt (1/4 x 5/8
inch)
18).
3. Light cross mount
4. Nut
19).
Light Position Table (page 7)
3. Light cross mount
4. Left light mount
4. Secure the left light assembly and right light
assembly to the left light mount and right light
mount using the lock washer and hex nut on the
light assemblies
Note:
Install the lights with the low beam toward
the outer edge of the machine.
Look at the bottom of the lights for high beam
and low beam orientation.
g305380
1. Light assembly
2. Light mount
g305381
9
(Figure 20).
Figure 20
3. Lock washer
4. Hex nut
g305382