Toro Groundsmaste 3200 Series Installation Instructions Manual page 11

3. Secure the left short mount and right short or
long mount to the left mount and right mount
using 4 carriage bolts (5/16 x 3/4 inch) and 4
flange nuts (5/16 inch) as shown in
Note:
Refer to the
for the appropriate position of the lights.
Figure 23
1. Left short mount
2. Flange nut (5/16 inch)
4. Secure the left light housing and right light
housing to the left short mount and right short
mount using 4 carriage bolts (1/4 x 5/8 inch) and
4 locknuts (1/4 inch) as shown in
Figure 24
1. Left short mount
2. Carriage bolt (1/4 x 5/8
inch)
Figure
Light Position Table (page 7)
3. Left mount
4. Carriage bolt (5/16 x 3/4
inch)
Figure 24.
3. Left light housing
4. Locknut (1/4 inch)
5. Apply the appropriate speed decal to the
speed-plate mount
Apply the 20 kph decal for models 31900 and
23.
31901.
Apply the 24 kph decal for models 31902 and
31903.
g304044
1. Speed-plate mount
6. Install the 2 speed nuts to the speed-plate mount
(Figure
g319940
1. Speed-plate mount
11
(Figure 25).
Figure 25
2. Speed decal
26).
Figure 26
2. Speed nut
g304252
g304256