Toro Groundsmaste 3200 Series Installation Instructions Manual page 13

10. Secure the assembled speed-plate mount to
the hood using 4 flange-head bolts (1/4 x 3/4
inch), 2 back mounts, and 4 locknuts (1/4 inch)
as shown in Figure
1. Flange-head bolt (1/4 x
3/4 inch)
2. Assembled speed-plate
mount
11. Drill a hole (1/2 inch) through the hood screen
for routing the wire harness
Important:
Ensure that you do not drill
through any engine components, specifically
the Diesel Particulate Filter (DPF).
1. Drill the 1/2-inch hole here. 2. Front of the machine.
12. Remove the bolt and nut from the hydraulic-line
mount (Figure 32).
Retain the fasteners.
30.
Figure 30
3. Back mount
4. Locknut (1/4 inch)
(Figure 31).
Figure 31
1. Nut
2. Hydraulic-line mount
g304254
13. Secure the horn to the horn-mounting bracket
using the previously removed bolt and nut
(Figure 33).
1. Horn
2. Nut
14. Apply the appropriate speed decal to each side
of the hood
Apply the 20 kph decals for models 31900 and
g304253
31901.
Apply the 24 kph decals for models 31902 and
31903.
13
Figure 32
3. Bolt
Figure 33
3. Horn-mounting bracket
4. Bolt
(Figure 34).
g304258
g304255