Toro Groundsmaste 3200 Series Installation Instructions Manual page 16

5. Secure the taillights to the inner mount
assemblies using 4 pan-head screws (#10 x
1-1/4 inches) and 4 flange nuts (#10) as shown
in Figure 36.
Figure 36
1. Flange nut (#10)
2. Inner mount assembly
3. Amber lens
6. Connect the wire-harness connector labeled
R L LH (P01) to rear light
EAR IGHT
7. Connect the wire-harness connector labeled
R L RH (P02) to rear light
EAR IGHT
g304304
4. Red lens
5. Pan-head screw (#10 x
1-1/4 inches)
(Figure 35).
(Figure 35).
8. Secure the assembled taillights to the taillight
housings using 8 button-head bolts (1/4 x 3/4
inch) as shown in
Ensure that you install the taillights with the
yellow lens on top
1. Button-head bolt (1/4 x 3/4
inch)
16
Figure 37.
(Figure 36 and Figure
Figure 37
2. Taillight assembly
37).
g305040