Toro Groundsmaste 3200 Series Installation Instructions Manual page 8

1. Secure the left light base and right light base
to the cab frame using 2 carriage bolts (3/8 x
3/4 inch) and 2 locknuts (3/8 inch) on each side
(Figure 14).
Figure 14
1. Carriage bolt (3/8 x 3/4
inch)
2. Locknut (3/8 inch)
2. Secure the left light mount and right light mount
to the light bases using 3 button-head bolts (1/4
x 5/8 inch) through the speed nuts on each side
(Figure 15).
Note:
Refer to the
for the appropriate position of the lights.
Figure 15
1. Light base
2. Right light mount
3. Right light base
4. Left light base
Light Position Table (page 7)
3. Button-head bolt (1/4 x 5/8
inch)
4. Left light mount
3. Secure the left light assembly and right light
assembly to the left light mount and right light
mount using the hex nut on the light assemblies
(Figure 16).
Note:
Install the lights with the low beam toward
the outer edge of the machine.
Look at the bottom of the lights for high beam
and low beam orientation.
g303644
1. Light assembly
2. Light mount
For Machines without a Cab
1. Remove the tie-down bracket from the platform
(Figure 17).
Retain the parts.
g303645
1. Tie-down bracket
2. Bolt
8
Figure 16
3. Hex nut
Figure 17
3. Nut
g303646
g299562