M+Cpu-Camrec_Axis_Etrigger; Overview; Labels - Mitsubishi Electric MELSEC iQ-R Series User Manual

10.2

M+CPU-CamRec_AXIS_ETrigger

Overview

This FB executes the recording event set to the network camera manufactured by Axis Communications that is connected to
the MELSEC-Q series QnUDVCPU.
M+CPU-CameraRecord_AXIS_EventTrigger
(1) B:FB_EN
(2) W:iw_ConnectionNo
(3) S:is_Username
(4) S:is_Password
(5) W:iw_VIPortNo
To use this FB, setting labels for subroutine FBs is required. ( Page 54 Creating a program)

Labels

Input labels
No. Variable name Name
(1) FB_EN Execution command
(2) iw_ConnectionNo Connection number
(3) is_UserName User name
(4) is_PassWord Password
(5) iw_VIPortNo Virtual input port
number
Output label
No. Variable name Name
(6) FB_ENO Execution status
(7) FB_OK When the FB
completed
successfully
(8) FB_ERROR When the FB
completed with an
error
(9) ERROR_ID Error code
FB_ENO:B (6)
FB_OK:B (7)
FB_ERROR:B (8)
ERROR_ID:W (9)
Data type Effective
range
Bit On or off
Word [signed] 1 to 16
String (15) 4 to 14
characters
String (65) 4 to 64
characters
Word [signed] 1 to 32
Data type Initial
value
Bit Off
Bit Off
Bit Off
Word [signed] 0
10 FB LIBRARY DETAILS (FOR MELSEC-Q SERIES CPU MODULES)
Description
On: The FB is activated.
Off: The FB is not activated.
Specifies the connection number.
Specifies the user name registered in the corresponding
network camera.
(Available strings: a to z, A to Z, 0 to 9)
Specifies the password registered in the corresponding
network camera.
Specifies the port number of the virtual input for which the
recording event is executed.
Page 22 Recording Event Settings
Description
On: The execution command is on.
Off: The execution command is off.
The on state indicates that sending the command for
switching the virtual input port has been completed.
The on state indicates that an error has occurred in the FB.
Returns the error code of an error occurred in the FB.
10.2 M+CPU-CamRec_AXIS_ETrigger
10
97