M+Camerarecord_Axis_Virtualinputcontrol_R; Overview; Labels - Mitsubishi Electric MELSEC iQ-R Series User Manual

8.3

M+CameraRecord_AXIS_VirtualInputControl_R

Overview

This FB enables or disables the execution trigger of the recording event set to the network camera manufactured by Axis
Communications that is connected to the MELSEC iQ-R series CPU module.
M+CameraRecord_AXIS_VirtualInputControl_R
(1) B:i_bEN
(2)
DUT:i_uConnectionNo
S:i_sUsername
(3)
(4) S:i_sPassword
(5) UW:i_uVirtualInputPortNo
(6) B:i_bVirtualInputPortState

Labels

Input labels
No. Variable name Name
(1) i_bEN Execution command
(2) i_uConnectionNo Connection number
(3) i_sUserName User name
(4) i_sPassWord Password
(5) i_uVirtualInputPortNo Virtual input port
number
(6) i_bVirtualInputPortState Virtual input port
status
Output labels
No. Variable name Name
(7) o_bENO Execution status
(8) o_bOK FB completed
successfully
(9) o_bErr FB completed with
an error
(10) o_uErrId Error code
8 FB LIBRARY DETAILS (FOR MELSEC iQ-R SERIES CPU MODULES (BUILT-IN ETHERNET PORT PART))
o_bENO:B (7)
(8)
o_bOK:B
o_bErr:B
(9)
o_uErrId:UW (10)
Data type Effective
range
Bit On or off
Word [unsigned] 1 to 16
String (255) 4 to 14
characters
String (255) 4 to 64
characters
Word [unsigned] 1 to 32
Bit On or off
Data type Initial value
Bit Off
Bit Off
Bit Off
Word [unsigned] 0
8.3 M+CameraRecord_AXIS_VirtualInputControl_R
Description
On: The FB is activated.
Off: The FB is not activated.
Specifies the connection number.
Specifies the user name registered in the corresponding
network camera.
(Available strings: a to z, A to Z, 0 to 9)
Specifies the password registered in the corresponding
network camera.
Specifies the port number of the virtual input to be enabled/
disabled.
Page 22 Recording Event Settings
On: The virtual input port status is enabled.
Off: The virtual input port status is disabled.
Description
On: The execution command is on.
Off: The execution command is off.
The on state indicates that sending the command for
switching the virtual input port has been completed.
The on state indicates that an error has occurred in the FB.
The error code of an error occurred in the FB is stored.
8
73