Mitsubishi Electric MELSEC iQ-R Series User Manual page 27

4.
Set "Action". Content to be set varies depending on the recording method.
Video recording before and after the recording trigger
• Select "Record video".
• Set a desired pre-event recording time in "Prebuffer".
• Set a desired post-event recording time in "Postbuffer".
If a duration specified in "Prebuffer" is long, video may not be recorded for the specified duration depending
on the performance of the network camera used. Before actual use, verify the operation to ensure that video is
recorded for the duration specified in the settings.
5.
Set the created stream profile, and select "Network storage" for "Storage".
6.
Click the [Save] button to set the rules.
When "SD card" is selected for "Storage", although video files are recorded in the SD memory card, they
cannot be played back on GX VideoViewer.
Video recording while the recording trigger is on
Select "Record video while the rule is active".
4 NETWORK CAMERA SETTINGS
4.3 Recording Event Settings
4
25