Mitsubishi Electric MELSEC iQ-R Series User Manual page 57

■Example to create M+CPU-CamRec_AXIS_SetTime (Time setting)
This FB is executed once when the operating status of the CPU module is changed to RUN to set the time information of the
CPU module to the network camera.
■When bSetTime_EN (FB execution command) is turned on, the time of the CPU module is set to the network camera.
• The network camera is specified with iw_ConnectionNo (Connection number).
• The network camera authentication is cleared with is_UserName (User name) and is_PassWord (Password).
• Global label
To use this FB, setting labels for subroutine FBs is required. ( Page 54 Creating a program)
• Program
Input label Setting details
FB_EN On: The FB is activated.
Off: The FB is stopped.
iw_ConnectionNo Sets the connection number.
is_UserName Sets the user name registered in the network camera.
is_PassWord Sets the password registered in the network camera.
Output label Setting details
FB_ENO On: The execution command is on.
Off: The execution command is off.
FB_OK The on state indicates that setting the time has been completed.
FB_ERROR The on state indicates that an error has occurred in the FB.
ERROR_ID Returns the error code of an error occurred in the FB.
Setting example

1
"root"
"Pass1234"
5 PROGRAMMABLE CONTROLLER SETTINGS
5.3 MELSEC-Q Series CPU Module
5
55