5.2
MELSEC iQ-R Series RJ71EN71, RnENCPU
(Network Part)
Ethernet port settings
Configure the Ethernet port settings using GX Works3.
Own node settings
[Navigation window] [Parameter] [Module information] Module to be used [Port (n) Module Parameter]
[Basic Settings] [Own Node Settings]
1.
Set the IP address and subnet mask of the Ethernet port to be used.
Set the IP address in the same segment as the network camera.
5 PROGRAMMABLE CONTROLLER SETTINGS
38
5.2 MELSEC iQ-R Series RJ71EN71, RnENCPU (Network Part)