Mitsubishi Electric MELSEC iQ-R Series User Manual page 38

■Example to create M+CameraRecord_AXIS_VirtualInputControl_R (Virtual input port control)
This FB executes a recording event of the network camera with the virtual input port status on or off.
■When bVirtualInputControl_EN (FB execution command) is turned on, the recording is instructed to the network camera.
• The network camera is specified with i_uConnectionNo (Connection number).
• The network camera authentication is cleared with i_sUserName (User name) and i_sPassWord (Password).
• The virtual input port is specified with i_uVirtualInputPortNo (Virtual input port number).
• i_bVirtualInputState (Virtual input port status) is turned on (enabled).
■When the recording direction has been completed successfully (bVirtualInputControl_OK is on), i_bVirtualInputState (Virtual input port status) is turned off,
and bVirtualInputControl_EN (FB execution command) is turned on again.
• Global label
• Program
i_bEN
i_bVirtualInputState
o_bOK
Virtual input port status of
the camera
Recording duration
(1) Video recording duration
5 PROGRAMMABLE CONTROLLER SETTINGS
36
5.1 MELSEC iQ-R Series CPU Module (Built-in Ethernet Port Part)
ON ON
OFF
ON
OFF
ON ON
OFF
ON
OFF
(1)
OFF
OFF
ON ON
OFF
OFF
OFF