Table Of Contents - Toro LT-F3000 Operator's Manual

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Introduction
This machine is a ride-on, flail-blade lawn mower
intended to be used by professional, hired operators
in commercial applications. It is primarily designed
for cutting grass on well-maintained turf. Using this
product for purposes other than its intended use could
prove dangerous to you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.toro.com/en-gb
including safety tips, training materials, accessory
information, help finding a dealer, or to register your
product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number location
Model No.
Serial No.
© 2020-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
for more information,
Figure 1
Figure 1
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 4
General Safety ................................................... 4
Safety and Instructional Decals .......................... 5
Setup ...................................................................... 10
Product Overview ................................................... 10
Controls ........................................................... 10
Operator's Seat Controls............................... 12
Transport Latches ........................................ 14
Specifications .................................................. 19
Attachments/Accessories ................................. 19
Before Operation ................................................. 20
Before Operation Safety ................................... 20
Performing Daily Maintenance.......................... 20
Filling the Fuel Tank .......................................... 20
Checking the Forward/Reverse Traction
Pedal Action.................................................. 21
Checking the Interlock Switches ....................... 22
During Operation ................................................. 22
During Operation Safety ................................... 22
Understanding the Operator Presence
Controls ........................................................ 24
Adjusting the Roll Bar ....................................... 24
Starting the Engine ........................................... 26
Shutting Off the Engine..................................... 26
Flail Cutting Unit General Information ............... 27
Adjusting the Height of Cut ............................... 27
Controlling the Position of the Individual
g329968
Cutting Units ................................................. 28
Adjusting the Cutting Unit Auto-Limited
Lift ................................................................. 28
Engaging the Cutting Unit Drive ........................ 29
Adjusting the Weight Transfer/Traction
Assistance .................................................... 29
Clearing the Cutting Units ................................. 30
Operating Tips ................................................. 31
After Operation .................................................... 32
2
Figure 2
Safety-alert symbol
Contact us at www.Toro.com.
Printed in the UK
All Rights Reserved
g000502