Chassis; Inspecting The Seat Belt; Checking The Fasteners; Extended Maintenance - Toro LT-F3000 Operator's Manual

Chassis

Inspecting the Seat Belt

Service Interval: Before each use or daily
1. Inspect the seat belt for wear, cuts, and other
damage. Replace the seat belt(s) if any
component does not operate properly.
2. Clean the seat belt as necessary.

Checking the Fasteners

Service Interval: Before each use or daily
Check the machine for loose and missing fasteners.
Note:
Tighten any loose fasteners; replace any
missing fasteners.

Extended Maintenance

Service Interval: Every 250 hours—Inspect the
cooling-system hoses.
Every 2 years—Flush and replace the coolant.
Every 2 years—Replace all moving hoses.
Every 2 years—Replace the transmission cable.

Cleaning

Washing the Machine

Wash the machine as needed using water alone
or with a mild detergent. You may use a rag when
washing the machine.
Important:
Do not use brackish or reclaimed
water to clean the machine.
Important:
Do not use power-washing equipment
to wash the machine. Power-washing equipment
may damage the electrical system, loosen
important decals, or wash away necessary grease
at friction points. Avoid excessive use of water
near the control panel, engine, and battery.
Important:
Do not wash the machine with the
engine running. Washing the machine with the
engine running may result in internal engine
damage.
61