Toro LT-F3000 Operator's Manual page 33

Figure 34
6. At the right, front wheel motor brake assembly
remove the hex plug
Figure 35
1. Hex plug
7. Assemble a bolt 12 x 40 mm and washer 12
mm into the hole at the center of the motor end
plate (Figure 36).
(Figure 35).
1. Front wheel motor
2. Hex plug
8. Tighten the bolt in the threaded hole in
the brake piston until the brake releases
g328268
(Figure 36).
9. Repeat steps
left side of the machine.
Bypassing the Transmission
Pump
1. Use an 8 mm (5/16 inch) hex key to rotate
the 2 socket head plugs for the transmission
pump-relief valves counterclockwise 3 full turns
(Figure 37).
Important:
machine while it is towed. When the engine
is shut off, there is no hydraulic steering
assist—steering the machine feels heavy.
g292377
33
Figure 36
3. Washer 12 mm
4. Bolt 12 x 40 mm
6 through 8 for the brake at the
You must manually steer the
g014451