Special Tools
Order special tools from the TORO SPECIAL TOOLS
AND APPLICATIONS GUIDE (COMMERCIAL PROD-
UCTS).
Multimeter
The meter can test electrical components and circuits
for current, resistance, or voltage.
NOTE: Toro recommends the use of a DIGITAL Volt-
Ohm-Amp multimeter when testing electrical circuits.
The high impedance (internal resistance) of a digital me-
ter in the voltage mode will make sure that excess cur-
rent is not allowed through the meter. This excess
current can cause damage to circuits not designed to
carry it.
Skin-Over Grease
Special non-conductive grease (Toro Part No. 505-47)
which forms a light protective skin which helps water-
proof electrical switches and contacts.
Electrical Systems
Some tools may also be available from a local supplier.
Page 5 - 2
Rev. A
Figure 1
Figure 2
Reelmaster 5200-D/5400-D