Measures - Bosch Rexroth IndraDyn A Series Project Planning Manual

Rexroth IndraDyn A

Measures

DOK-MOTOR*-MAD/MAF****-PR03-EN-P
Danger of injury due to moving elements!
Danger of injury due to hot surfaces!
⇒ Do not carry out any maintenance measures when
the machine is running.
DANGER
⇒ During maintenance work, secure the system
against restarting and unauthorized use.
⇒ Do not work on hot surfaces.
Bosch Rexroth recommends the following maintenance measures, based
on the maintenance plan of the machine manufacturer:
Measure
Only for MAF: Check the functioning
of the coolant system
Only for MAD: Check the functioning
of the motor fan and the air circulation.
Check the mechanical and electrical
connections.
Check the machine for smooth
running, vibrations and bearing noises.
Remove dust, chips and other dirt
from the motor housing, cooling fins
and the connections.
Fig. 12-1: Maintenance measures
Operating IndraDyn A Motors
Interval
According to the guidelines in the
machine maintenance plan, but at
least every 1,000 operating hours.
According to the guidelines in the
machine maintenance plan, but at
least every 1,000 operating hours.
According to the guidelines in the
machine maintenance plan, but at
least every 1,000 operating hours.
According to the guidelines in the
machine maintenance plan, but at
least every 1,000 operating hours.
Depending on the degree of soiling,
but after one operating year at the
latest.
12-3