Table of Contents
Advertisement
Rexroth IndraDyn A
3
Safety Instructions for Electric Drives and Controls
3.1
General Information
Using the Safety Instructions and Passing them on to Others
Instructions for Use
DOK-MOTOR*-MAD/MAF****-PR03-EN-P
Safety Instructions for Electric Drives and Controls
Do not attempt to install or commission this device without first reading all
documentation provided with the product. Read and understand these
safety instructions and all user documentation prior to working with the
device. If you do not have the user documentation for the device, contact
your responsible Bosch Rexroth sales representative. Ask for these
documents to be sent immediately to the person or persons responsible
for the safe operation of the device.
If the device is resold, rented and/or passed on to others in any other
form, then these safety instructions must be delivered with the device.
Improper use of these devices, failure to follow
the safety instructions in this document or
tampering with the product, including disabling
of safety devices, may result in material
WARNING
damage, bodily harm, electric shock or even
death!
Read these instructions before the initial startup of the equipment in order
to eliminate the risk of bodily harm or material damage. Follow these
safety instructions at all times.
• Bosch Rexroth AG is not liable for damages resulting from failure to
observe the warnings provided in this documentation.
• Read the operating, maintenance and safety instructions in your
language before starting up the machine. If you find that you cannot
completely understand the documentation for your product, please ask
your supplier to clarify.
• Proper and correct transport, storage, assembly and installation as
well as care in operation and maintenance are prerequisites for
optimal and safe operation of this device.
• Only assign trained and qualified persons to work with electrical
installations:
• Only persons who are trained and qualified for the use and
operation of the device may work on this device or within its
proximity. The persons are qualified if they have sufficient
knowledge of the assembly, installation and operation of the
equipment as well as an understanding of all warnings and
precautionary measures noted in these instructions.
• Furthermore, they must be trained, instructed and qualified to
switch electrical circuits and devices on and off in accordance with
technical safety regulations, to ground them and to mark them
according to the requirements of safe work practices. They must
have adequate safety equipment and be trained in first aid.
• Only use spare parts and accessories approved by the manufacturer.
• Follow all safety regulations and requirements for the specific
application as practiced in the country of use.
3-1
Advertisement
Table of Contents
