Table of Contents
Advertisement
Rexroth IndraDyn A
12
Operating IndraDyn A Motors
12.1 Commissioning
Preparation
Execution
DOK-MOTOR*-MAD/MAF****-PR03-EN-P
Material damage due to errors in the controls of
motors and moving elements! Unclear operating
states and product data!
⇒ Do not carry out commissioning if connections,
CAUTION
operating states or product data are unclear or faulty!
⇒ Do not carry out commissioning if the safety and
monitoring equipment of the system is damaged or
not in operation.
⇒ Damaged products may not be operated!
⇒ Contact Bosch Rexroth for missing information or
support during commissioning!
The following notes on commissioning refer to IndraDyn A motors as part
of a drive system with drive and control devices.
1. Keep the documentation of all applied products ready.
2. Log all measures taken in the commissioning log.
3. Check the products for damage.
4. Check all mechanical and electrical connections.
5. Activate the safety and monitoring equipment of the system.
When all prerequisites have been fulfilled, proceed as follows:
1. Activate the fan at the MAD or the external cooling system for supply
of the MAF motors, and check for regular condition. Heed the notes
of the manufacturer.
2. Carry out the commissioning of the drive system according to the
instructions of the corresponding product documentation. You can
find the respective information in the functional description of the
drive control device.
3. Log all measures taken in the commissioning report.
Commissioning of drive controllers and the control unit may
require additional steps. The inspection of the functioning and
performance of the systems is not part of the commissioning of the motor;
instead, it is carried out within the framework of the commissioning of the
entire machine. Observe the information and regulations of the machine
manufacturer.
Operating IndraDyn A Motors
12-1
Advertisement
Table of Contents
