Table of Contents
Advertisement
Rexroth IndraDyn A
Additional Grounding Wire at MAF225C
DOK-MOTOR*-MAD/MAF****-PR03-EN-P
In accordance with EN 60034--1:2004 (11.1 Grounding of Machines),
motors of frame size MAF225C must additionally be grounded with a
separate grounding wire with a minimum core cross-section of 16 mm
To this end, a connecting screw (Fig. 8-2) with thread M12 has been
provided at the end shield of the MAF225C. By means of this connection
screw, fasten the additional grounding wire with a ring cable lug for thread
M12.
(1):
Connecting screw for the additional grounding wire
Fig. 8-2:
Additional grounding wire at MAF225C
Connection Techniques
Erdung_MAF225.tif
8-3
2
.
Advertisement
Table of Contents
