Rexroth IndraDyn A
9.14 Attachment of Drive Elements
Redundant bearings
Couplings
effective
rotary radial force
permissible rotary
radial force?
(see Fig. 9-32)
No
Bearing
"R"
Observe the following notes
for the attachment of couplings!
DOK-MOTOR*-MAD/MAF****-PR03-EN-P
For all attachments of drive elements to the drive shaft, such as
• gearboxes
• couplings
• pinions
it is imperative that the following notes are observed.
Generally, overtermined bearings are to be avoided by all means when
connecting drive elements. The tolerances inevitably present in such
cases will lead to additional forces acting on the bearing of the motor
shaft and, should the occasion arise, to a distinctly reduced service life of
the bearing and/or to fatigue transverse rupture/vibration rupture of the
motor shaft.
Attachment
of Drive Elements
Pulleys
Yes
Bearing
"H", "N", "V"
Fig. 9-38:
Application of drive elements
Note:
If redundant attachment cannot be avoided, it is absolutely
necessary to consult with Bosch Rexroth.
Application Notes
Pinions
- Helical Driving Pinion
- directly geared
- Bevel Gear Pinion
restricted
allowed!
Observe the following notes for
the attachment of Pinions!
Anbau von Antriebselementen_EN.EPS
9-29
Only