Edit Motor Calibration Offset - ABB FlexPLP IRPLP 220 Product Manual

5.3 Edit motor calibration offset

Procedure
Use this procedure to set Edit Motor Calibration Offset:
1
2
Product manual - FlexPLP IRPLP 220
3HAW050041018-001 Revision: C
Action
On the FlexPendant, tap on the
ABB logo to access the ABB menu
and tap on Calibration.
All mechanical units connected to
the system are shown along with
their calibration status.
Tap to select the mechanical unit
and then tap to select Calib.Para-
meters.Tap Edit Motor Calibration
Offset..., a pop-up warning dialog
box is displayed. Tap Yes to pro-
ceed.
© Copyright 2016 - 2018 ABB. All rights reserved.
5.3 Edit motor calibration offset
Info/Illustration
xx1800002150
xx1800002151
xx1800002152
Continues on next page
5 Calibration
85