Examples Of Configurations - ABB FlexPLP IRPLP 220 Product Manual

4.3.4 Examples of configurations

System example: One 3-axis FlexPLP IRPLP 220
Below is an example of configuration with one single cabinet IRC5 which controls
one 3-axis FlexPLP IRPLP 220 through one 3-axis SMB box. Note that if the
controller's XS.1 and XS.2 are already occupied, and if the number of drive units
in the controller is enough for all the mechanical units, it is possible to use a power
cable for IRC5's XS.7 (3-axis) and a resolver cable for XS.41.
xx1800002141
System example: Two 3-axis FlexPLP IRPLP 220
Below is an example of configuration with one single cabinet IRC5 which controls
two 3-axis FlexPLP IRPLP 220 through one 6-axis SMB box.
xx1800002142
Product manual - FlexPLP IRPLP 220
3HAW050041018-001 Revision: C
© Copyright 2016 - 2018 ABB. All rights reserved.
4 Installation and commissioning
4.3.4 Examples of configurations
Continues on next page
75