Configuring The Boards Of The Bts On The Smt; Table 5-1 Trx Types Configured On The Bts3900 Gsm Or The Bts3900A Gsm - Huawei BTS3900 GSM Commissioning Manual

BTS3900(A) GSM
Commissioning Guide
Step 4 Click Close to close the Site Management Right dialog box.
After the commissioning task in the transmission unavailable scenario is complete, you should
release the site management rights. Otherwise, the BTS cannot be monitored on the LMT in
fifteen minutes.
The procedure for releasing the site management rights is as follows:
Click Release in the Site Management Right dialog box. When Releasing site management
right successfully. is displayed, click Close to close the dialog box.
----End

5.2.2 Configuring the Boards of the BTS on the SMT

This describes how to configure the TRX boards and other boards of the BTS.
Context
Table 5-1
GSM.

Table 5-1 TRX types configured on the BTS3900 GSM or the BTS3900A GSM

BTS Type
BTS3900 GSM
BTS3900A GSM
Procedure
Step 1 Click Board in the navigation pane.
The Board Configuration and Board Management windows are displayed.
Step 2 Double-click Board Configuration.
The Board Configuration window is displayed, as shown in
Issue 02 (2009-04-20)
CAUTION
shows the types of TRXs that can be configured on the BTS3900 GSM or BTS3900A
NOTE
The following description takes one DRFU of the CPRI0 port as an example to describe the configuration
of the TRX board. One DRFU of the CPRI0 port is configured on the first level of the SPF0 link.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Commissioning the BTS (Transmission Unavailable)
TRX Type
DRRU, DRFU, GRRU, and GRFU
DRRU, DRFU, GRRU, and GRFU
Figure 5-6.
5-7