Figure 6-18 Rxu Ring In Combined State - Huawei BTS3900 GSM Commissioning Manual

BTS3900(A) GSM
Commissioning Guide
7.
8.
9.
10. Delete breakpoints: Set Break Point 1 Position and Break Point 2 Position to NULL.
11. Click OK, and return to the Site Device Attributes dialog box. The two breakpoints marked
12. Click OK, and then click Finish to return to the BSC6000 Local Maintenance
Issue 02 (2009-04-20)

Figure 6-18 RXU ring in combined state

In the BSC6000 Local Maintenance Terminal window, right-click the target site and
choose Configure Site Board Attributes, and the Site Device Attributes dialog box is
displayed.
Click Configure Site Board Attributes. The Site Device Attributes dialog box is
displayed.
Right-click the RXU chain, and choose Set Break Point. The Set RXU Chain Break
Point dialog box is displayed.
with red cross are cleared.
Terminal window. All the alarms are cleared, and the status of each board is normal, as
shown in Figure 6-19.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Optional Commissioning Tasks
6-21