Features And Functions - microHAM microKEYER II User Manual

General:
single USB connection to computer
•
stand alone CW and FSK operation
•
Complete "Computer <-> Radio" galvanic isolation
•
transformer isolation of sound card and radio
•
optical isolation of radio signals
•
Internal USB sound
•
Wide range audio level: works with transceiver levels from 100 mV to 1.5 V
•
Extremely low noise floor: as low as 0.7 mV effective
•
High dynamic range: 84 dB typical, 82 dB minimum
•
Supports Voice operation with microphone
•
Standard Windows Audio Class device – no custom driver required
•
compatible with most standard MS Windows based logging or control programs
•
Radio control:
integrated level converter for CI-V, FIF-232, IF-232, or RS-232
•
up to 57600 Baud with handshake support
•
supports most Elecraft, Icom, Kenwood, Ten-Tec, Yaesu and other radios
•
SDR receiver tracking
•
Other:
Programmable LCD status display
•
2 Watt amplifier for monitor/sidetone
•
CI-V output for controlling Icom compatible accessories
•
Serial output for controlling generic peripherals
•
user definable presets to recall all parameters for different control programs or contests
•
all parameters stored in EEPROM and reloaded after power up
•
integrated chokes and filters for maximum RFI immunity
•
Metal/Aluminum case, powder coated and silk screened
•
Free, no time limit firmware/software upgrades via Internet
•
Keying:
optical isolation of all keying signals from computer
•
Hot Switch PA protection with user defined timing
•
programmable PTT assertion delay in 1ms steps
•
T/R sequencer with extended capabilities
•
separately sequenced keying outputs for low noise amplifier or receive antenna control
•
supports VOX and CAT T/R switching
•
wide range solid state or relay PA and LNA PTT buffers
•
CW:
enhanced K1EL WinKey™ with paddle buffer
•
front panel speed knob
•
selectable side tone capabilities with "paddle side tone" function
•
nine (9) user programmable memories
•
application independent contest auto-numbering
•
supports PS/2 keyboard for CW transmission with type ahead
•
supports PS/2 keyboard or keypad for CW "memory keyer" and control
•
PS/2 keyboard or keypad CW works without computer connection
•
microHAM © 2010 All rights reserved

1 - FEATURES AND FUNCTIONS

3