Table of Contents
Advertisement
FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Device
Warning
sign
Heat
detector
Smoke
detector
Extinguisha
nt abort
button
Issue 02 (2017-01-10)
Operation
Check Standard
started.
Silence/Sound
Alarm to start or
abort the fire alarm
bell. Reset the key
to Enable Control
by flipping it
leftward.
Pull up the reset
The warning sign
indicator is on.
button on the
pneumatic switch.
1. If the temperature
Heat the heat
detector using a
heating device.
2. If the temperature
1. If the smoke
Release smoke
onto the smoke
detector using a
smoke pistol.
2. If the smoke
1. After the
1. After the
manual gas
release button is
pressed on the
extinguishant
control panel,
the gas release
2. After the
countdown
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Maintenance Guide
Replace by following
instructions in
Replacing Warning Signs
(CE).
Replace by following
is below the alarm
instructions in
threshold, the
Replacing a Heat Detector
alarm indicator
(CE).
blinks once every
6s.
is above the alarm
threshold, the
indicator turns on.
The extinguishant
control panel
generates an
alarm and triggers
the fire alarm bell.
Replace by following
density is below
instructions in
the alarm
Replacing a Smoke Detector
threshold, the
(CE).
alarm indicator
blinks once every
6s.
density is above
the alarm
threshold, the
indicator turns on.
The extinguishant
control panel
generates an
alarm and triggers
the fire alarm bell.
Replace by following
extinguishant
instructions in
abort button is
Replacing the Extinguishant
pressed, the gas
Abort Button
release
countdown stops.
extinguishant
4 Routine Maintenance
instructions in
6.5.6
Replacing a Fire Alarm
Bell
(CE).
6.5.3
6.5.2
6.5.1
6.5.7
(CE).
51
Advertisement
Table of Contents
