FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Figure 6-96 Switching off the standby power supply
Step 3 Disconnect cables from the faulty VESDA batteries.
Step 4 Use a Phillips screwdriver to remove screws on the battery protective panel, and remove the
protective panel.
Step 5 Replace the batteries, and connect battery cables.
Distinguish the positive and negative battery terminals when connecting battery cables.
Figure 6-97 Connecting battery cables
Step 6 Reinstall the battery protective panel.
Issue 02 (2017-01-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
179