Table of Contents
Advertisement
FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Preparations
Tools: flat-head screwdriver (5-10 mm), step ladder (2 m), protective gloves
Materials: spare Polymer T/H sensor
Documents: monitoring device layout, management system initial configuration table
Skill requirement: weak-current engineer
Procedure
Step 1 Press the clamp strip and remove the cover of the T/H sensor.
Figure 6-13 Removing the T/H sensor cover
Step 2 Remove the network cable from the T/H sensor. Install a new T/H sensor and reconnect the
network cable to the sensor.
Step 3 Reset parameters by referring to the management system initial configuration guide.
Step 4 Check that the new T/H sensor is working properly.
----End
Follow-up Procedure
Dispose of the removed Polymer T/H sensor that is confirmed faulty.
Issue 02 (2017-01-10)
For the diagrams and tables, see the initial configuration parameter manual for the solution in use.
If the T/H sensor displays the temperature and humidity properly after power-on, the T/H sensor is
working properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
96
Advertisement
Table of Contents
