Softkeys - NEC SL2100 Features And Specifications Manual

ISSUE 1.0
Description
Each display telephone provides interactive softkeys for intuitive feature access. It is no longer
necessary to remember feature codes to access the telephone advanced features because the
function of the softkeys change as the user processes calls.
Additional options allow you to fine tune the Multiline Terminal volume levels for handset receive and
transmit, speaker volume, ringer and handset volume, and headset volume levels. You can also
customize the point at which the built-in speakerphone switches from transmit to receive; a boon for
noisy environments. The display telephones also have a contrast control for the LCD display.
Soft Key mode (DSX) is set at PRG 15-02-60 : Mode2 and can be entered by depressing Center key
when the terminal is idle. Refer Navigation key feature section.
Softkey Disable
Softkey indication on LCD or related key operations can be configured not to work by each terminal
base.
Conditions
• If a feature is restricted by an extension Class of Service, though the Softkey menu still displays the
option, the user cannot set the feature.
• The feature must be active to change the volume (e.g., telephone must be ringing, page being
heard, etc.).
• To use Softkey Disable function, PRG 15-02-71 has to set "1 = Disable" at associated terminal. And
this works only when PRG 15-02-60 is set to "0 = standard mode".
• When set Softkey Disabled, Softkey indications on LCD are not displayed, and related SoftKeys are
not operational. Also Cursor keys are all disabled.
• Depend on the feature Softkey indication may appear, however Softkey operation does not work.
Default Settings
Display shows time/date/extension/Softkey menu information.
System Availability
Terminals
IP7[ ]-8IPLD-C1 TEL
IP7WW-24TXH-B1-TEL and IP7WW-12TXH-B1-TEL
IP4WW-24TIXH-C-TEL
IP4WW-24TXH-B-TEL and IP4WW-12TXH-B-TEL
Required Component(s)
None
Features and Specifications Manual
SL2100

Softkeys

1-785
S